Ergodex DX1 Open Source Drivers

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Wishlist ======

Some wishes taken from wishes posted on the Ergodex forum, linked as appropriate.

Wishes are (currently) in no particular order.



===== Shift Keys =====

On a regular keyboard there are modifer keys (shift, control, alt, windows, numlock, capslock, etc), when pressed groups of other keys can behave differently.  The same functionality is required for the DX1 pad, but with more control of which keys causes a set of other keys to change.

I (Hydra) envisage the following:

__able to assign one or more to a named group__

e.g.
assign keys 1-4 to key group "wasd movement" mappings: 1-W, 2-A, 3-S, 4-D
assign keys 1-4 to key group "cursor movement" mappings: 1-UP, 2-LEFT, 3-DOWN, 4-RIGHT

__able to enable any key to toggle a named group__

momentarily while pressed, press and release to cycle groups, or press and release to change permanently

e.g.

assign key 5 so that when pressed and held the keys 1-4 are reprogrammed as per the "cursor movement" group.\\
assign key 5 so that each time is it pressed an released it enables the next key group in it's (cycle) list of key groups (wasd movement -> cursor movement -> was movement ...)\\
assign key 5 so that when pressed and released it maps any keys in a named group assigned to it.  If it's pressed again it will do whatever it's currently configured to do.\\

__be able to assign a modifier key (key 5 in our example) to a key group__

e.g.

assign keys 1-11 to key group "set 1" as follows:
    * 1-10, Numbers 1 to 9 and 0.
    * 11, assign so that when pressed and released it will enable "set 2"

assign keys 1-5 to key group "set 2" as follows:
    * 1-4, F1-F4
    * 5, assign so that when pressed and released it will enable "set 3"

assign keys 1-12 to key group "set 3" as follows:
    * 1-10, F1-F10
    * 11, assign so that when pressed and released it will enable "set 1"
    * 12, assign so that when pressed and held it enables "set 4", when released the keys in "set 3" are reconfigured as per all active key groups. (they so they will do what they were doing before key 12 was held)

assign keys 1-10 to key group "set 4"
    * 1-10 assigned to Ctrl+F1 to Ctrl+F10

This flexibility will let you do totally crazy things with your DX1 pad!  You would be able to emulate a [[http://www.frogpad.com/|frogpad]] as well as allow sending of any character via the DX1.

One post makes mention of the fact the toggle states would sometimes need to be visible, otherwise you've no idea of the state of the keys on the pad just by looking at it.  One possible solution to this might be to use the led's on the device to communicate to the user it's current state.  Each keygroup could say, "when i'm active, do this to the leds: blink combination 1".  Of course it's also possible to have on on-screen UI to show you the sites (think vista sidebar plugin), but that's no good if you're running a fullscreen application or game.

Here's an example of a simple layout that requires "toggle" modifier keys.

{{http://www.simix.inf.br/markus/img/dx1.jpg}}

Various posts in the Ergodex forums cover things like this, my example above caters for them all.

http://www.ergodex.com/forum/viewtopic.php?t=310\\
http://www.ergodex.com/forum/viewtopic.php?t=319\\
http://www.ergodex.com/forum/viewtopic.php?t=301\\
http://www.ergodex.com/forum/viewtopic.php?t=70\\
http://www.ergodex.com/forum/viewtopic.php?t=220\\



===== Macro loops =====

Macros that repeat forever, until the key is pressed again.

http://www.ergodex.com/forum/viewtopic.php?t=353

===== Copying Macros =====

Need to be able to cut and paste different bits of macros together when creating/editing a macro

http://www.ergodex.com/forum/viewtopic.php?t=353

===== Key Differentiation =====

The original Ergodex software does not differentiate between the two different enter keys as well as "/" and "Numpad /" on a standard keyboard

http://www.ergodex.com/forum/viewtopic.php?t=323

===== Multiple DX1s =====

It's not possible to use more than 1 DX1 per computer at the same time.

http://www.ergodex.com/forum/viewtopic.php?t=250

===== Support Non-US/Non-Qwerty keyboards in GUI =====

If an on-screen keyboard is displayed it should show the user's current keyboard with the keycaps in the right place.  Pressing "Q" on any keyboard should always show the icon for the keycap "Q" in the UI.  Both azerty and qwerty send the same scancodes.  However in order for user's of "azerty" keyboards to share their configurations to users of "qwerty" keyboards (e.g. that contain macros that type in words like "quazar" with a keypress) I think the manager will need to be configured to send keys as "text" to the OS (either by raising different events, or perhaps the same kind events but passed though a keyboard layout translation layer)

http://www.ergodex.com/forum/viewtopic.php?t=250
Ergodex DX1 Open Source Drivers

User Tools

Site Tools

Page Tools
