This is an old revision of the document!
Table of Contents
Wishlist
Some wishes taken from wishes posted on the Ergodex forum, linked as appropriate.
Wishes are (currently) in no particular order.
Shift Keys
On a regular keyboard there are modifer keys (shift, control, alt, windows, numlock, capslock, etc), when pressed groups of other keys can behave differently. The same functionality is required for the DX1 pad, but with more control of which keys causes a set of other keys to change.
I (Hydra) envisage the following:
* able to assign one or more to a named group e.g. assign keys 1-4 to key group “wasd movement” mappings: 1-W, 2-A, 3-S, 4-D assign keys 1-4 to key group “cursor movement” mappings: 1-UP, 2-LEFT, 3-DOWN, 4-RIGHT * able to enable any key to toggle a named group (momentarily while pressed, press and release to cycle groups, or press and release to change permanently) e.g. assign key 5 so that when pressed and held the keys 1-4 are reprogrammed as per the “cursor movement” group. assign key 5 so that each time is it pressed an released it enables the next key group in it's (cycle) list of key groups (wasd movement → cursor movement → was movement …) assign key 5 so that when pressed and released it maps any keys in a named group assigned to it. If it's pressed again it will do whatever it's currently configured to do. * be able to assign a modifier key (key 5 in our example) to a key group. e.g. assign keys 1-11 to key group “set 1” as follows:
- 1-10, Numbers 1 to 9 and 0.
- 11, assign so that when pressed and released it will enable “set 2”
assign keys 1-5 to key group “set 2” as follows:
- 1-4, F1-F4
- 5, assign so that when pressed and released it will enable “set 3”
assign keys 1-12 to key group “set 3” as follows:
- 1-10, F1-F10
- 11, assign so that when pressed and released it will enable “set 1”
- 12, assign so that when pressed and held it enables “set 4”, when released the keys in “set 3” are reconfigured as per all active key groups. (they so they will do what they were doing before key 12 was held)
assign keys 1-10 to key group “set 4”
- 1-10 assigned to Ctrl+F1 to Ctrl+F10
This flexibility will let you do totally crazy things with your DX1 pad! You would be able to emulate a frogpad (TODO: provide link) as well as allow sending of any haracter via the DX1.
Various posts in the ergodex forums cover things like this, my example above caters for them all.
Macro loops
Macros that repeat forever, until the key is pressed again.
Copying Macros
Need to be able to cut and paste different bits of macros together when creating/editing a macro
